Uses of Safety Harnesses in Industrial Settings

Uses of Safety Harnesses in Industrial Settings

More than one-fifth of accidents that lead to death or spinal cord injury occur at altitude. Unfortunately, more than 90 percent of people who have an accident either do not use safety equipment or do not know how to use it. Full-body safety harness prevent an incident from turning into death. These products are produced for two purposes, firstly, in the event of a free fall, the force is distributed equally between the thighs, hips, chest, and shoulders in all parts of the body, and problems Do not create a body for a person. The second goal is that all parts of the person’s body should be free and able to do their work well. The Occupational Safety and Health Organization (OSHA) recommends using full-body harnesses on scaffolding over 10 feet high or during industrial lifts, climbing, etc. All workers should know that hanging in any type of harness for more than 5 minutes can cause many problems and even be fatal.

Safety Belts Are Normally Made in Two Types

The first type fits around the waist like a belt and is usually used by electrical technicians.

The second type of belt is more complete than the first type. That is, they completely cover the whole body, which is known as harness belts. These belts cover the leg from the shoulder to the thigh with many strong straps. This type is usually used for parachutes, working at very high altitudes, etc.

Important Points When Using and Preparing Industrial Belts

  • Industrial safety belt and straps on the shoulder and other straps related to it should be made of solid leather canvas or hemp or other special and appropriate materials.
  • The harness ropes must be made of high-quality hemp or similar materials and their endurance against the tensile force for breaking should not be less than 1150 Kg.
  • Leather belts should be carefully inspected to ensure that they are not cracked or cut from the inside.
  • The rivets on the belt should be carefully inspected individually to ensure that they are free of any defects.
  • All parts and attachments of safety belt clips must have a resistance equal to the resistance of the belt itself.

The use of a safety belt for working at the height of the whole body is different depending on the type of work a person does at height, so it is better to get detailed information about the capabilities of the harness before buying from the MEF – hardware tools supplier store.